Impact 18020612 Nitro SA2020 Helmet, Flat Black, Size XLarge

Description

Impact’s Nitro helmet was specifically made with Alcohol and Nitro drag racers in mind with its integrated breather system and drag specific eye port, Engineered to alleviate the fumes emitted from nitro and alcohol powered dragsters, the Nitro by Impact features a replaceable filter system and bottled air intake port, A built-in SFI 3.3/10 rated Nomex® skirt helps keep the fresh air contained in the helmet while the braided Kevlar eye port gasket provides for an excellent fire retardant seal around the shield, The Impact Nitro also features a built-in D-ring to keep the head restrained during launch, Manufactured from Impact’s exclusive “Intelligent Gray Matter” and upholstered in fire retardant soft-knit Nomex®, the interior features removable cheek pads
Impact 18020612 Nitro SA2020 Helmet, Flat Black, Size XLarge
Sku # 4491802-FBLK-XL
Mfr. Part # 18020612
Condition
New
Brand
Impact Racing
Sold
Each
Details
Notes
Please carefully read, understand and adhere to the following information. Since your helmet is engineered to very exacting standards, correct care is vital to its proper functioning.
SHIELD HARDWARE: to insure proper shield fit and function, it is important to check the tightness of the shield pivot and shield positioning screws before every use. Tighten until screws are firmly seated, careful to not over tighten.
HELMET CHEEK FIT PADS: to change, remove or replace cheek fit pads, turn the helmet upside down and place thumb under cheek pad and ‘pinch’ thumb with fingers on exterior shell. This will prevent separating and helmet upholstery from the shell as you remove the cheek fit pad. With free hand, slowly pull the cheek fit pad away from the hook and loop interior starting at the corner. Replace with new cheek pad.
HELMET INNER LINER: after a race, wet fit pads and liner should be dried in the shade using a fan.
MINI CHAMP & VAPOR HELMET INSERTS: The helmet comes from the factory as a size large without an insert. To place insert into the helmet perform the following: Hold Helmet with base opening facing you. Carefully fold back hat band upholstery toward you around the entire circumference of the helmet. Insert a Quick-Fit insert at the rear of helmet first and continue to push insert in and smooth insert down around the entire crown of the helmet. Fold hat band liner back into position.
HELMET HARDWARE: all fastening hardware and straps should be checked regularly for strength and security. Keeping all components of the helmet clean and well cared for is very important. Even perspiration can compromise the effectiveness of the hardware and straps
Info
Impact’s Nitro helmet was specifically made with Alcohol and Nitro drag racers in mind with its integrated breather system and drag specific eye port. Engineered to alleviate the fumes emitted from nitro and alcohol powered dragsters, the Nitro by Impact features a replaceable filter system and bottled air intake port. A built-in SFI 3.3/10 rated Nomex® skirt helps keep the fresh air contained in the helmet while the braided Kevlar eye port gasket provides for an excellent fire retardant seal around the shield. The Impact Nitro also features a built-in D-ring to keep the head restrained during launch. Manufactured from Impact’s exclusive “Intelligent Gray Matter” (a variable-density, single-piece inner liner) and upholstered in fire retardant soft-knit Nomex®, the interior features removable cheek pads. Optionally available cheek pads are available in a variety of thicknesses and configurations to provide a custom fit. The Impact Nitro also offers a variety of anti-fog, tinted, and Hi-Def Amber shields with excellent visual acuity for the most accurate read of the tree.
Made in the USA
SNELL SA2020 CERTIFIED
Shell construction of our exclusive aerospace industry derived composites
Built-in headsock/helmet skirt
Pre-plumbed in the rear for quick attachment of bottle air systems. Kevlar® eyeport gasket.
Internal face mask/respirator completely surrounds the nose and mouth to prevent intake of contaminated air
Gray Matter fire-retardant covered liner made of Impact's "intelligent" single piece variable-density core
Interchangeable cheekpads for a perfect fit (comes with std cheekpads, other sizes are extra)
Fire-retardant Kevlar® chinstrap with locking dual D-ring design
125" Clear Shield comes standard with 3 position detent
Colors available: Black, Flat Black, Silver, White
Sizes available: XSmall, Small, Medium, Large, XLarge
Charts
Impact Racing Adult Helmet Sizing Chart (JPG)
Specs
Sold in Quantity
Each
Color
Black
Helmet Size
X-Large
Age Group
Adult
Restraint Compatible
Yes
Helmet Type
Full Face
Helmet Shield Color
Clear
Hat Size
7-5/8" - 7-3/4"
Head Circumference - Metric
61-62
Fresh Air Equipped
No
Shield Included
Yes
Finish
Matte
Safety Rating
Snell SA2020
Helmet Shell Material
Composite
MFG. Part #
18020612
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.