ZAMP - RZ-37Y SFI 24.1 Youth Racing Helmet- Auto Kart Dirt - Pink / Grey Graphic

Description

Shipping Advisory:
Due to the pandemic, USPS is currently experiencing significant shipping delays.
Please
do not
rely on the "guaranteed delivery date" shown by eBay as they are not taking these delays into account.
At this time, most shipments are arriving a few days *later* than delivery date shown by eBay.
ZAMP - RZ-37Y SFI 24.1 Youth Racing Helmet
-
Spring
SALE!
MSRP:
9.95
Spring
SALE!:
9.95 - Price Reduction for a Limited Time Only!
The RZ-37Y Youth Racing Helmet was designed with the safety of junior racers in mind! This helmet is approved for both Junior Drag Racing and Quarter Midget Racing as well as many other series!
Features include:
Composite Fiberglass Lightweight Shell
Lower chin bar to reduce buffeting
7-Top Air System
– in addition to Chin and Scalp Vents/Exhausts
Smaller Shell Design
Plush Fire Retardant Interior
Very Lightweight (Approximately 1250 Grams!)
Z-20 Series 3mm Shield with Tear Off Posts
Removable/Washable Comfort Liner
Scalp and Chin Bar Ventilation with rear exhaust
Includes soft-touch drawstring Helmet Bag
M6 Terminal Hardware for easy use with HANS Devices
SFI 24.1 and DOT Rated
Two holes on Each Side Of Chin foam for Radio/Hydration Installation
This helmet comes with a clear shield as standard- If you choose an "Extra Shield" you will receive
both
the selected additional shield as well as the original clear shield.
Optional Helmet Bag
Fly Racing - Pro Helmet Garage Bag
Oversized helmet bag fits all helmet brands
Full fleece interior provides the ultimate in protection
Upper Mesh Venting allows helmet to dry quickly
Generous Side Pockets - Holds your balaclavas, gloves, and more!
ZAMP RZ-37Y Helmet Sizing
Proper helmet fit is vital to the performance of a helmet during an impact.
For the helmet to perform properly during an impact, it must stay securely on the head.
Measuring the head is only a starting point for the entire sizing procedure.
Due to varying shapes, heads that are apparently the same size when measured may not necessarily fit the same size helmet.
For your initial measurement, you can use a small metal tape measure or cloth tape.
You can also use a string, which can then be laid against a measuring tape.
Measure the head from a point half an inch above the eyebrows and around the back of the head that results in the largest possible measurement.
Take several measurements. The largest measurement is the one you want to use.